SKU: SSUCP.214
SSUCP214 Metric Stainless Steel Two Bolt Pillow / Plummer Block Housing with 70mm Bore Stainless Insert
SSUCP214 Metric Stainless Steel Two Bolt Pillow / Plummer Block Housing with 70mm Bore Stainless Insert
Equivalent to: NP70
Out of stock
Description
Description
|
UCP or NP Series Stainless Steel Plummer / Pillow Housings: Supplied with a fully sealed stainless steel bearing insert fitted in the stainless steel housing and includes a grease nipple to facilitate re-lubrication. The bearing insert has 2 grub screws to allow tightening against the shaft once fitted. The inserts (available separately) can be removed from the housings for future replacement as required Benefits: Cost effective bearing / housing assembly, re-lubricatable, replaceable insert, grub screw fixing, food safe and approved, exceptionally strong and durable Note: These bearings will eventually corrode in a marine environment and it is recommended to completely cover with grease or similar protection where practical. Due to the material requirements of these bearings to have a hard-wearing construction, they will be made of a harder form of Stainless Steel, such as 440 or similar, which will be attracted by magnets. Quotations for non-magnetic versions are available upon request. |
- Brand / Quality:
- EU Budget - Economy Quality
- Inside Diameter:
- 70mm
- Style:
- SSUCP
- Bolt Hole Centres:
- 210mm
Technical
Technical
| d | 70mm |
|---|---|
| h | 79.4mm |
| a | 266mm |
| e | 210mm |
| b | 72mm |
| s2 | 31mm |
| s1 | 25mm |
| g | 27mm |
| w | 156mm |
| B1 | 74.6mm |
| n | 30.2mm |
| Bolt | 20mm |
| Weight | 7 kg |
| Dynamic load | 4870 kgf |
| Static load | 3810 kgf |
| Rec max speed | 2450 rpm |
Reviews
Reviews
